Trouble shooting
en
9
3
Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
--------
Replacing bulbs
:
Warning – Risk of electric shock!
When changing the bulbs, the bulb socket contacts are
live. Before changing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in the
fuse box.
Important
Only use a bulb of the same type and same
power (see also the bulb holder or rating plate).
Replacing halogen bulbs with screw base
Notes
■
To replace the bulbs, do not remove the plastic
cover. The bulbs can be accessed from inside by
removing the metal grease filters.
■
When inserting halogen bulbs, do not touch the
glass bulb. Use a clean cloth to insert the halogen
bulbs.
1.
Allow the bulb to cool down.
2.
Remove the metal grease filters.
3.
Unscrew the bulb and replace it with a bulb of the
same type.
4.
Fit the metal grease filters.
5.
Insert the mains plug and switch on the fuse again.
Replace the bulb with one of the same type:
Voltage:
240
V
Power:
max. 28
W
Thread:
E14
Problem
Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to the
electricity supply
Power cut
Check whether other kitchen
appliances are working
Faulty fuse
Check in the fuse box to make
sure that the fuse for the appli-
ance is OK
The lighting does
not work.
The bulbs are
faulty.
For information on changing
the bulbs, see the "Replacing
Bulbs" section.
+'*(
