en
Familiarising yourself with your appliance
6
5
Familiarising yourself with your appliance
Familiarise yourself with the parts of your appliance.
5.1 Controls
The controls are used to configure all functions of your
appliance and to obtain information about the operat-
ing status.
5
3
4
1
2
7
6
1
Fan setting 1
2
Fan setting 2
3
Fan setting 3
4
Intensive mode 1
5
Intensive mode 2
6
Odour filter saturation indicator
1
7
Grease filter saturation indicator
1
Depending on the appliance specifications
Switching the appliance on or off
Increasing the fan setting
Decreasing the fan setting
Switching automatic mode
1
on or off
Home Connect
Reset the filter saturation indicator
Removing or inserting the grease filter/odour
filter
1
Switching Guided Air on or off
1
Depending on the appliance specifications
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
To use it in circulating-air mode, you must set the oper-
ating mode.
Note:
For use in circulating-air mode, you require addi-
tional Accessories.
Requirement:
The appliance is switched off.
▶
Or wait approx. 10 seconds until the setting is
saved automatically.
To cancel the setting, press .
a
A signal tone sounds as soon as the selected set-
ting is saved.
7
Basic operation
You can find out everything you need to know about
operating your appliance here.
7.1 Switching on the appliance
▶
Press to switch on the appliance.
a
The appliance starts at fan setting 2.
a
The Ambient Light automatically switches on.
7.2 Switching off the appliance
▶
Press .
a
The fan run-on starts at fan setting 1.
a
The Ambient Light remains switched on for ap-
prox. 10 minutes.
a
The glass panel remains extended halfway.
a
The appliance switches off automatically after ap-
prox. 10 minutes.
a
The glass panel moves downwards and the appli-
ance closes.
7.3 Selecting a fan setting
▶
Press or .
