Basic settings
en
23
16 Basic settings
You can configure the appliance to meet your needs.
16.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Selection
Language
See selection on the appli-
ance.
Clock
Clock in 24-hour format.
Factory setting
Reset
Do not reset
1
Audible signal
Short duration (30 seconds)
Medium duration (1 minute)
1
Long duration (5 minutes)
Volume
5 settings
Button tone
Switched on
Switched off (tone remains
for )
1
Display brightness
5 settings
Clock display
Off
Digital
1
Analogue
Lighting
Off during operation
On during operation
1
Automatic continue
(only applicable for the
Microwave operating
mode)
Do not resume microwave
automatically
1
When closing the door
Operation after switch-
on
Main menu
Types of heating
1
Microwave
MicroCombi
Assist
Warning: Baking tray in
microwave
Display
1
Do not display
Night-time dimming
Switched off
1
Switched on
1
Factory setting (may vary according to model)
Basic setting
Selection
Brand logo
Display
1
Do not display
Dry microwave
Switched on
1
Switched off
Fan run-on time
Recommended
1
Minimum
Sabbath mode
Switched on
Switched off
1
1
Factory setting (may vary according to model)
16.2 Changing the basic settings
Requirement:
The appliance is switched on.
1.
Press
.
2.
Press "Basic settings".
3.
Press the required basic setting and use the control
ring to change it.
The red bar next to the text field identifies the basic
setting that is currently selected. Its corresponding
value is shown in the display.
4.
Use "Further settings" to scroll through the basic
settings and, if required, use the control ring to
change any of these settings.
5.
To save your changes, press
and use "Save"
to confirm.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
▶
Press
and use "Do not save" to confirm.
a
All changes will be discarded and not saved.
16.3 Setting the time
Requirement:
The appliance is switched on.
1.
Press
.
2.
Press "Basic settings".
3.
Press "Time".
4.
Use the control ring to change the time.
5.
To save your changes, press
and use "Save"
to confirm.
17 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
17.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.