Childproof lock
en
19
‒
To stop the signal early, press any touch field.
‒
If you want to continue cooking again, press .
‒
When the dish is ready, press and use to
switch the appliance off.
13 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
13.1 Activating and deactivating the
childproof lock
You can activate and deactivate the childproof lock re-
gardless of whether the appliance is switched on or off.
1.
Press and hold for approx. 4 seconds to activate
the childproof lock.
a
A confirmation note appears on the display.
a
The control panel is locked. The appliance can only
be switched off using .
a
When the appliance is on, lights up. When the ap-
pliance is off, does not light up.
2.
Press and hold for approx. 4 seconds to deactiv-
ate the childproof lock.
a
A confirmation note appears on the display.
14 Basic settings
You can configure the appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Selection
Language
See selection on the appli-
ance.
Clock
Clock in 24-hour format.
Audible signal
Short duration (30 seconds)
Medium duration (1 minute)
1
Long duration (5 minutes)
Button tone
Switched on
Switched off (tone remains
for )
1
Display brightness
5 settings
Clock display
Off
Digital
1
Lighting
Off during operation
On during operation
1
Automatic continue
(only applicable for the
Microwave operating
mode)
No microwave
1
When closing the door
Operation after switch-
on
Main menu
Types of heating
1
Microwave
MicroCombi
AutoPilot
Warning: Baking tray in
microwave
Display
1
Do not display
Night-time dimming
Switched off
1
Switched on
Brand logo
Display
1
Do not display
1
Factory setting (may vary according to model)
Basic setting
Selection
Dry microwave
Switched on
1
Switched off
Fan run-on time
Recommended
1
Minimum
Sabbath mode
Switched on
Switched off
1
Factory setting
Reset
Do not reset
1
1
Factory setting (may vary according to model)
14.2 Changing the basic settings
Requirement:
The appliance is switched off.
1.
Press and hold for approx. three seconds.
2.
Press to confirm the messages in the display.
a
The first basic setting is shown in the display.
3.
Use the control ring to change the basic setting.
4.
Press .
a
The next basic setting appears in the display.
5.
Use to scroll through the basic settings and, if re-
quired, use the control ring to change any of these
settings.
6.
To save the changes, press and hold for approx.
three seconds.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
▶
Press .
a
All changes will be discarded and not saved.
14.3 Setting the time
Requirement:
The appliance is switched off.
1.
Press and hold for approx. three seconds.
2.
Press to confirm the messages in the display.
a
The first basic setting is shown in the display.
3.
Press .
a
The "Time" basic setting is shown in the display.
4.
Use the control ring to change the time.
