2 | en
7 620 200 072 | 09.2020
Robert Bosch GmbH
CE approval
The Amplifier CM-A 19 has been tested according to the
regulatory requirements of the European Union (EU) in
accordance with the 2014/30/EU standard, and meets
all the requirements for the CE label.
The complete text of the EU Declaration of Conformity is
available at this internet address:
www.bosch-professional-systems.com
Specific to US:
The users manual or instruction manual for an intentio-
nal or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules [and
with RSS-GEN of Industry Canada].
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications made to this equipment not
expressly approved by Robert Bosch GmbH may void the
authorization to operate this equipment.
Responsible Party – U.S. Contact Information:
Robert Bosch LLC
15000 Haggerty Road
Plymouth, MI 48170
Road safety
Make sure that your ability to drive is not
impaired and your vision is not blocked by the
device or the wiring connected to it.
Risk of electrical shock or fire
If you disassemble the device, it might result in
electrical shock or fire.
Do not open the device.
Malfunctions
Do not use the device if you notice any
malfunctions such as poor video quality.
Continued use of a malfunctioning system may
result in accidents, fire or electrical shock.
Contents | Important information
Contents
2
Important information
2
Agreed product use
2
CE approval
3
Installation
3
Switching on/off
3
Technical data
4
Device drawings
Important information
Before using the device, please read these instructions
carefully and familiarize yourself with the device. Keep
these instructions in your vehicle for later reference.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
Agreed product use
The device has been designed for operation in a
commercial vehicle with a 24 V electrical system.
The device must not be operated in any other environ-
ment or in an intended environment that is compromi-
sed e.g. by damage or malfunction.
