Bosch CAD 12, Инструкции по эксплуатации и монтажу, Страница: 61 / 448

en | 61
7 620 210 015/020-022 | 05.2015 Robert Bosch Car Multimedia GmbH
en
Additional settings
The device's setup menu allows you to make
changes to the settings to suit your prefer-
ences.
Settings for connected devices
Adjusting the display format
The following settings are available for the
display format:
f
NORM PS: The DVD player is connected to
a 4:3 display. The wide-screen image is
displayed on the screen at full width with
black bars at the top and bottom edge of
the screen.
f NORM LB: The DVD player is connected to
a 4:3 display. The wide-screen image is
displayed using the full height of the
screen. The left and right edge of the
wide-screen image are automatically cut
off.
f
WIDE: The DVD player is connected to a
16:9 display. The wide-screen image is
displayed on the screen at full size.
To open the setup menu,
f
press the SETUP button : .
f
Using the or button 6 , select the
menu item showing the current setting
(“WIDE”, “NORM LB” or “NORM PS”).
f
Select the desired setting using the or
button 6 .
f Press the SETUP button : to exit the
menu or the or button 6 to select
another menu item.
Adjusting the color television
standard of the display
For perfect image quality: On the DVD player
you must set the color television standard that
is used by the connected display.
“PAL” is the standard used in Europe; “NTSC” is
the standard for the American/Asiatic region.
Note:
If this setting is changed, it takes
effect only after the device is
switched off and on again via the
vehicle ignition.
To open the setup menu,
f press the SETUP button : .
f Using the or button 6 , select the
menu item showing the current setting
(PAL or NTSC).
f
Select the desired setting using the or
button 6 .
f
Press the SETUP button
:
to exit the
menu or the or button
6
to select
another menu item.
Parental control
You can prevent playback of DVDs that are
unsuitable for minors by defining a rating level.
If a DVD supports rating levels and it does not
correspond to the rating level set on the
device, it will not be played.
Note:
Not all DVDs support rating levels.
Additional settings
02_CAD12_en.indd 61 12.05.15 18:10