Bosch CAD 12, Инструкции по эксплуатации и монтажу, Страница: 45 / 448

en | 45
7 620 210 015/020-022 | 05.2015 Robert Bosch Car Multimedia GmbH
en
Tone and display
Adjusting the treble (TREB), middle
(MID) and bass (BASS)
f
Press the AUD M button to open the
menu.
f Press the
AUD
M button repeatedly until
“BASS”, “MID” or “TREB” appears on the
display along with the current setting.
f
Turn the volume control
B
to the left or
right in order to set the bass, middle or
treble levels to b7 and -7.
In order to leave the menu,
f
press the AUD
M
button, repeatedly if
necessary.
Adjusting the left/right volume bal-
ance (BAL)
f
Press the AUD M button to open the
menu.
f
Press the AUD M button repeatedly until
“BAL” appears on the display along with
the current setting.
f Turn the volume control
B
to the left or
right in order to set the volume balance to
b10 and -10.
In order to leave the menu,
f
press the AUD M button, repeatedly if
necessary.
Switching the loudness (LD) on
and off
f
Press the AUD M button to open the
menu.
f
Press the AUD M button repeatedly until
“LD” appears on the display, along with
the current setting “ON” or “OFF”.
f Turn the volume control
B
to the left or
right in order to switch the loudness on or
off.
In order to leave the menu,
f
press the AUD M button, repeatedly if
necessary.
Resetting the tone
You can reset all the tone adjustments to their
factory default settings (TREB, MID, BASS,
BAL: 0; LD: OFF).
f
Press the AUD M button to open the
menu.
f
Press the AUD M button repeatedly until
“RESET N” appears in the display.
f
Turn the volume control
B
to the right in
order to select “RESET Y”.
After about 2 seconds all the tone adjustments
will be reset.
In order to leave the menu,
f
press the AUD M button, repeatedly if
necessary.
Note:
You can reset the tone adjustments at
any time by holding down the
AUD
M button for longer than 2 seconds.
This resets all tone adjustments for
the audio source being used at the
time.
Tone and display
02_CAD12_en.indd 45 12.05.15 18:10