manualshive.com logo in svg

Bosch BULLS Twenty 6 EVO, Перевод оригинальной инструкции по эксплуатации, Страница: 68 / 116

Поделиться
Скачать
Bosch BULLS Twenty 6 EVO Скачать руководство пользователя страница 68

MY20B01 - 52_1.0_02.10.2019

68

Operation

6.12

Electric drive system

6.12.1 Switching on the electric drive 

system 

A sufficiently charged battery has been inserted 
into the pedelec.

The battery is firmly positioned. The battery key 
has been removed.

There are three options for switching on the drive 
system.

On-Off button (battery)

Press the 

On-Off button (battery)

 briefly.

On-Off button (display)

Press the 

On-Off button (display)

 once.

Switched-on display

If the display is already switched on when it is 
inserted into its mount, the electric drive 
system is switched on automatically.

After switching on, a speed of 0 KM/H is 
displayed on the 

display

. If it is not, check 

whether the 

display screen

 is fully engaged into 

position.

If the drive system is switched on, the drive is 
activated as soon as the pedals are moved with 
sufficient force (except if in push assist mode 
or the level of assistance is "OFF"). 

The motor power is determined by the level of 
assistance set on the display. 

As soon as the system has been activated, 
ACTIVE LINE/PERFORMANCE LINE 
appears briefly on the 

display

.

6.12.2 Switching off the drive system

As soon as you stop pushing the pedals in normal 
mode or reach a speed of 25 km/h, the drive 
system switches off the assistance system. The 
assistance system starts up again if you push the 
pedals and your speed is less than 25 km/h.

The system switches off automatically ten minutes 
after the last command. There are three options 
for switching off the drive system manually.

On-Off button (display)

Press the 

On-Off button (display)

 once.

On-Off button (battery)

Press the 

On-Off button (battery)

.

Removing the display

Remove the 

display

 from the mount.

The LEDs on the operating status and battery 
level indicator go out.

Crash caused by lack of readiness for braking

When it is switched on, the drive system can be 
activated by the application of force on the 
pedals. There is a risk of a crash if the drive is 
activated unintentionally, and the brake is not 
reached.

Never start the electric drive system, or switch 
it off immediately, if the brake cannot be 
reached safely and reliably.

CAUTION

!

Содержание BULLS Twenty 6 EVO





















































































































Отзывы:

Нет отзывов