Bosch BULLS Twenty 6 EVO, Перевод оригинальной инструкции по эксплуатации, Страница: 46 / 116

MY20B01 - 52_1.0_02.10.2019
46
Operation
6.3 Error message
6.3.1 Display
The drive system monitors itself continuously and
displays a number as an error message if a known
error is detected. The system may switch off
automatically depending on the type of error.
Code Description Method of resolution
410 One or more display
buttons are blocked

Check whether buttons are
jammed because dirt has
accumulated between them,
for example. Clean the
buttons if they need cleaning.
414 Control panel connection
problem
 Have ports and connections
checked. Contact your
specialist dealer.
418 One or more buttons on
the control panel are
blocked

Check whether buttons are
jammed because dirt has
accumulated between them,
for example. Clean the
buttons if they need cleaning.
419 Configuration error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
422 Connection problem with
the drive unit
 Have ports and connections
checked.
423 Connection problem with
the drive unit

Have ports and connections
checked.
424 Communication error with
components
communicating with one
another
 Have ports and connections
checked.
426 Internal time-out error It is not possible to display or
adjust the tyre size in the basic
settings menu in this error status.
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
430 Display battery flat

Recharge display battery
(while in its mount or using
USB port).
431 Software version error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
440 Internal drive unit error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
450 Internal software error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
Table 49: List of display screen error messages
460 Error in USB port
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
490 Internal display error  Have display checked.
500 Internal drive unit error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
502 Fault in the lighting
1
Check the light and its
cabling.
2
Re-start the system.
3
Contact your specialist
dealer if the problem
persists.
504 System responses to
detected tuning.
Pedelec switches to
emergency ride mode and
logs the error
 Can be reset for 90 minutes
by riding in emergency mode
(possible 3 times).
 If the error reoccurs, the
specialist dealer will need to
set up the system again.
503 Speed sensor error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
510 Internal sensor error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
511 Internal drive unit error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
530 Battery error
1
Switch off system.
2
Remove the battery.
3
Re-insert battery.
4
Re-start electric drive
system.
5
Contact your specialist
dealer if the problem
persists.
531 Configuration error
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
540 Temperature error
The pedelec is outside the
permitted temperature
range
1
Switch off the system to cool
the drive unit down or warm
to the permitted temperature
range.
2
Re-start the system.
3
Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 49: List of display screen error messages