manualshive.com logo in svg

Bosch BULLS Twenty 6 EVO, Перевод оригинальной инструкции по эксплуатации, Страница: 35 / 116

Поделиться
Скачать
Bosch BULLS Twenty 6 EVO Скачать руководство пользователя страница 35

MY20B01 - 52_1.0_02.10.2019

35

Transporting and storing

4

Transporting and storing 

 

4.2

Transporting 

 

 

Take into account the weight of the ready-to-
use pedelec when transporting it.

Remove the display screen and the batteries 
before transporting the pedelec.

Protect the electrical components and 
connections on the pedelec from the weather 
conditions with suitable protective covers.

Remove accessories such as drinking bottles 
before transporting the pedelec.

When transporting by car, you must use a 
suitable bicycle rack system.

4.1

Physical transport 
characteristics

4.1.1

Dimensions during transportation

There was no information relating to the box 
dimensions at the time of going to press. You'll 
find the information in the latest 

operating 

instructions

 on the retailer portal.

4.1.2

Transport weight

There was no information relating to the box 
dimensions at the time of going to press. You'll 
find the information in the latest 

operating 

instructions

 on the retailer portal.

4.1.3

Designated handles/lifting points

There was no information relating to the box 
dimensions at the time of going to press. You'll 
find the information in the latest 

operating 

instructions

 on the retailer portal.

Notice

Oil and grease may leak if the pedelec is lying flat.

If the shipping box with a pedelec is lying flat or 
standing on one end, it does not provide the 

frame

 

and wheels with adequate protection against 
damage.

Transport the pedelec in an upright position 
only.

Crash caused by unintentional activation

There is a risk of injury if the drive system is 
activated unintentionally.

Remove the battery. 

CAUTION

!

Oil leak if no transport securing device

The brake securing device prevents the brakes 
from being applied accidentally during 
transportation. This could cause irreparable 
damage to the brake system or an oil leak, which 
will harm the environment.

Never push the brake lever when the wheel 
has been dismounted.

Always use the transport securing system when 
transporting dismounted wheels.

Notice

Bicycle rack systems which use the 

handlebars 

or 

frame

 to hold the pedelec in an upside-down 

position exert inadmissible forces on its 
components during transportation. This can 
cause the supporting parts to break.

Never use bicycle rack systems which use the 
pedelec's handlebars or frame to hold it in an 
upside-down position.

The specialist dealer will advise you on how to 
select a suitable rack system properly and how to 
use it safely.

If you ship the pedelec, we recommend that 
you have it partially dismantled and packaged 
properly by the specialist dealer.

Transport the pedelec in a dry, clean position 
where it is protected from direct sunlight.

CAUTION

!

Содержание BULLS Twenty 6 EVO





















































































































Отзывы:

Нет отзывов