Bosch BULLS Twenty 6 EVO, Перевод оригинальной инструкции по эксплуатации, Страница: 31 / 116

MY20B01 - 52_1.0_02.10.2019
31
Overview
3.6.3.3 Function display
The last setting is always displayed on the
function display screen by default.
The control panel with display shows one of three
items of journey information. The displayed item
of journey information can be switched
System data
To view all the information on the system being
used and the software, the rider has to call up the
system data .
System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error.
There is a table of system messages in the
appendix
Figure 24: The left battery is currently being charged
3.6.3.4 Gear recommendation
Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. You can increase the speed and range
while applying the same force by selecting the
right gear. It is therefore best to follow gear
recommendations.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.

The gear recommendation function has to be
switched on in the system settings.
3.6.3.5 Tachometer screen
The tachometer shows the current speed at all
times.
You can select whether the speed is displayed in
kilometres or miles in the system settings.
3.6.3.6 Function display
The function display shows texts and readings.
Three different types of information are shown:
• Journey information
• System settings and data, and
• System messages.
Screen display Function
TRIP Distance travelled since the last RESET
TOTAL Display of the total distance travelled
(cannot be changed)
RANGE Estimated range for the available battery
charge, calculated based on the most
recent riding mode.
Table 32: Journey information
Screen display Function
SERIAL NUMBER DU Drive system serial number
SERIAL NUMBER HMI Serial number for control panel with
display
SW VERSION HMI Software version of the control
panel with display
SW VERSION DU Drive system software version
SW VERSION PP Battery software version
Table 33: System data, not changeable
OF
MP H
KM /
Symbol Use

Pedalling frequency is too high, a higher gear is
recommended

Pedalling frequency is too low, a lower gear is
recommended
Table 34: Symbols of the gear recommendation function