Bosch BULLS 650-185, Руководство по эксплуатации

Страница: 72 / 238

71
Assembly
5.3.6 Checking the stem and handlebars
5.3.6.1 Checking the connections
1 Stand in front of the
ebike
. Clamp the front
wheel between your legs. Grasp the handlebar
grips.
2 Try to twist the handlebars against the
direction of the front wheel.
 The stem must not move or twist.
3 If the stem can be twisted, check fastening.

If the stem cannot be fastened, contact your
specialist dealer.
5.3.6.2 Checking stem is firmly in position
1 Press full body weight on the handlebars.

The handlebars must not move downwards in
the fork.
Stem with clamping lever version I
2 If the handlebars should move, increase the
lever tension in the clamping lever.
3 Turn knurled nut in a clockwise direction with
the clamping lever open.
4 Close clamping lever and check stem is firmly
in position again.
5 If the handlebars cannot be fastened, contact
your specialist dealer.
Stem with clamping lever version II and stem
with screw
 If the handlebars cannot be fastened, contact
your specialist dealer.
5.3.6.3 Checking
for
headset
play
1 Place the fingers of one hand on the upper
headset cup. Pull the front wheel brake with
the other hand and try to push the
ebike
backwards and forwards.
Keep in mind that there may be noticeable
play
due to worn-out bearing bushes or
brake pad
backlash in suspension forks and
disc brakes.

The headset cup halves must not move
towards one another.
2 Set bearing clearance as per the stem repair
manual as quickly as possible as otherwise the
bearing will become damaged. Contact
specialist dealer.
5.4
ebike
sale
 Complete
ebike
pass on the operating
instructions envelope.
 Note down the manufacturer and the number of
the battery key.
 Adjust the
ebike
to the rider; see Section 6.5.

Adjust the
kick
stand and shifter.
 Brief
the
operator or rider on all the
ebike's
functions (see Section 6.3).