Bosch BULLS 650-185, Руководство по эксплуатации

Страница: 126 / 238

125
Operation
6.19 Brake
The motor drive force is shut off during the ride as
soon as the rider is no longer pedalling. The drive
system does not switch off when braking.

In order to achieve optimum braking results, do
not pedal while braking.
6.19.1 Using the brake lever
Figure 126: Brake lever, rear (1) and front (2), SHIMANO
brake used as an example
 Push the left-hand brake lever to apply the front
wheel brake .
 Push the right-hand brake lever to apply the rear
wheel brake .
 Turn the setting wheel in an
counter
clockwise
direction to increase the rebound speed.
 Turn the setting wheel in a clockwise direction
to decrease the rebound speed.
Crash caused by brake failure
Oil or lubricant on the
brake rotor
in a disc
brake or on the rim of a rim brake can cause
the brake to fail completely. This may cause a
crash with serious injuries.
 Never allow oil or lubricant to come into
contact with the
brake rotor
or
brake pads
or
on the rim of a rim brake.

If the
brake pads
have come into contact with
oil or lubricant, contact specialist dealer to
have the components cleaned or replaced.
If the brakes are applied continuously for a long
time (e.g. while riding downhill for a long time),
the fluid in the brake system may heat up. This
may create a vapour bubble. This will cause air
bubbles or water contained in the brake system to
expand. This may suddenly make the lever travel
wider. This may cause a crash with serious
injuries.

Release the brake regularly when riding
downhill for a longer period of time.
WARNING
!
1
2