Bosch B465, Инструкция по установке и эксплуатации

Страница: 7 / 115

Conettix Universal Dual Path Communicator Safety | en 7
Bosch Security Systems, Inc. Installation and Operation Manual 2017.11 | 05 | F.01U.311.207
1 Safety
ESD precaution
Please note that the B465 Universal Dual Path Communicator and optional plug-in cellular
modules come in a plastic bags, and are protected from ESD. All plug-in cellular communicator
components may potentially be exposed to finger touches - therefore extra attention must be
paid to ESD (electrostatic discharge) precaution. Make sure there is no static interference
when using the board. Appropriate ESD protections must be taken and wearing electrostatic
equipment is recommended, such as anti-static wrist strap.
ESD damage can range from subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to damage because very small
parametric changes could cause the device not to meet its published specifications.
!
Warning!
Failure to follow these instructions can result in a failure to initiate alarm conditions
Bosch Security Systems, Inc. is not responsible for improperly installed, tested, or maintained
devices. Follow these instructions to avoid personal injury and damage to the equipment.
Notice!
Inform the operator and the local authority having jurisdiction (AHJ) before installing the
module in an existing system.
Disconnect all power to the control panel before installing the module.