Bosch B36CD, Инструкция по установке и использованию

Страница: 7 / 104

Installation and connection
en-us
7
Ventilation
Never cover or block ventilation openings.
Installing the door handle
1.
Fit the handle vertically onto the pre-assembled
bolts.
Note:
The holes in the handle must face up and
down.
2.
Use a 2.5 mm Allen wrench to tighten the top and
bottom pre-assembled screws clockwise.
Installing the drawer handle
1.
Fit the handle horizontally onto the pre-assembled
bolts.
Note:
The holes in the handle must be facing down.
2.
Use a 2.5 mm Allen wrench to tighten the bottom
pre-assembled screws clockwise.
Aligning the appliance
9
CAUTION
■
To avoid damaging the floor, always move the
appliance with the height-adjustable feet
screwed upwards.
■
The two front height-adjustable feet must
always be in contact with the floor to avoid the
appliance from rolling or tipping when the door
is opened.
Rollers are located under the appliance for easy
movement and alignment:
1.
Place the appliance vertically on a firm and
leveled floor.
2.
Using a wrench, screw down both of the front
height-adjustable feet so that they touch the floor.
3.
Compensate for floor unevenness with the front
height-adjustable feet.
Note:
To align, use a level.
13