Bosch B3512 Скачать руководство пользователя страница 47

Страница: 47 / 228

12.3 Status indicators overview

The Status indicators on the keypad provide a quick visual
reference for you to see how your system is operating.

Ready to arm. The green checkmark indicates whether
the system is ready to turn on (arm).

– ON Steady. All points are normal and the system is

ready to turn on.

– OFF. One or more points are faulted, and the system

is not ready to turn on.

On (armed). The red lock indicates whether the system
is on (armed).

– ON Steady. All areas are on with no alarms.

– Flashing. All areas are armed, and there is an active

alarm.

– OFF. One or more areas are off.

Trouble. The yellow caution lights when a trouble
condition exists.

– ON Steady. There is a system, device, or point

trouble.

– OFF. There are no system, device, or point troubles.

Control Panels

B93x keypad operation overview | en

Bosch Security Systems, Inc.

2015.01 | 02 | F.01U.307.371

Содержание B3512





































































































































































































































Результаты поиска

Содержание B3512

Отзывы:

Бренды по названию

Популярные бренды

Bosch B3512, Руководство пользователя

Результаты поиска

Содержание B3512

Отзывы:

Бренды по названию

Популярные бренды