Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 50 / 114

– Unit IP address: An identifier for the camera on a TCP/IP network. For example,
140.10.2.110 is a valid syntax for an IP address.
– Subnet mask: A mask used to determine what subnet an IP address belongs to.
– Gateway IP address: A node on a network that serves as an entrance to another network.
– Port: An endpoint to a logical connection in TCP/IP and UDP networks. The port number
identifies the use of the port for use through a firewall connection.
Notice!
Ensure that the network parameters of your cameras are available before you begin
configuration.
The AutoDome Junior IP defaults are as follows:
–
IP Address: 192.168.0.1
– Subnet Mask: 255.255.255.0
– Gateway IP Address: 0.0.0.0
The following sections provide instructions about installing the software necessary to view
images over an IP connection, configuring the IP network settings and accessing the
AutoDome Junior IP images from a Web browser.
Changing the Network Settings
The AutoDome Junior IP has a default IP address of 192.168.0.1. To change the IP address or
any network settings, you can use the Configuration Manager software or the AutoDome
Junior IP server.
Notice!
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway
IP Address.
Using the Configuration Manager
Configuration Manager is an optional network utility provided on the Bosch Security Systems
Web site. Use the Configuration Manager Manual to make any configuration changes.
Notice!
Depending on the PC network security settings, the user may have to add the new IP address
to the browser’s trusted sites list for the AutoDome Junior HD controls to operate.
Using the AutoDome Junior HD Web Server
To configure the camera using the AutoDome Junior HD server, do the following:
1.
Set the IP address on the PC to 192.168.0.1 to ensure that the PC and the IP AutoDome
are on the same Subnet.
2. Launch Microsoft Internet Explorer and navigate to the following URL http://192.168.0.1.
The Web browser opens the LivePage for the AutoDome Junior HD; a security warning
message is displayed.
3. Check the Always Trust box, then click Yes.
4. Click the Settings link, located at the top of the LivePage.
5. Click the Service Settings link, located in the left pane of the Settings window.
6. Click the Network link to open the Network Settings page.
11.4.1
50 en | Using the IP Interface AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.