Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 47 / 114

Using the IP Interface
The AutoDome Junior IP and HD transmits PTZ control commands and images over a TCP/IP
network. It also allows users to configure the camera display settings, camera operating
settings, and to configure the network parameters.
Notice!
This chapter uses the term “AutoDome Junior IP” to refer to both the AutoDome Easy II IP
and the AutoDome Junior HD cameras.
Some features and procedures described pertain only to the AutoDome Junior HD PTZ
(VJR-8xx) cameras.
The IP unit incorporates a network video server in the IP module. The primary function of the
server is to encode video and control data for transmission over a TCP/IP network. With its H.
264 encoding, it is ideally suited for IP communication and for remote access to digital video
recorders and multiplexers. The use of existing networks means that integration with CCTV
systems or local networks can be achieved quickly and easily. Video images from a single
camera can be simultaneously received on several receivers.
Refer to BVIP Firmware Updates, page 107, for firmware upgrade instructions.
Overview of Features
The AutoDome Junior HD module includes the following functionality:
Function Description
Video Encoding The camera uses the H.264 compression standards and
ensures that the data rate remains low even with high
image quality and can also be adapted to local
conditions within wide limits.
Streaming Encodes multiple data streams simultaneously
according to individually customized profiles. This
feature creates data streams that can serve different
purposes. For example, one (1) data stream for local
recording and one (1) data stream optimized for
transmission over the Local Area Network (LAN).
Multicast Enables simultaneous, real-time transmission to
multiple receivers. The network must implement the
UDP and IGMP V2 protocols as a prerequisite for
Multicasting.
Configuration Allows configuration for all camera settings from a Web
browser on the local network (Intranet) or on the
Internet. You can also update the firmware, load device
configurations, store configuration settings, and copy
these settings from one camera to another.
11
11.1
AutoDome Junior HD Series Using the IP Interface | en 47
Bosch Security Systems, Inc. Operation Manual 2014.11 | 6.1 | F.01U.275.803