Bosch AMC2-4R4, Руководство по установке

Страница: 16 / 66

– Four possible configurable host interfaces:
–
Ethernet (= standard)
– RS-485 2-wire
– RS-485 4-wire
– RS-232
– Reader interfaces
–
four RS-485 interfaces
– 8 relay outputs
–
voltage free, power is supplied externally (dry mode)
– powered by internal power supply (wet mode)
– 8 analog inputs with internal power supply
– Battery buffered SRAM and real time clock (RTC)
– Pluggable Compact Flash card
– Liquid Crystal Display
– Transfer rate host interface RS-485: 38,4 kBit/s
– Transfer rate host interface RS-232: 38,4 kBit/s
– Transfer rate host interface Ethernet: 10/100 Mbit/s
– Transfer rate to the extension interface: 9,6 kBit/s
– Transfer rate reader interface RS-485: 9,6 kBit/s or
19,2 kBit/s
– Self regulating transmit/receive switching
– Power supply: 10 V to 30 Vdc, max. 5 A
– Tamper contact for external covers
– If an external power supply is used then this should be an
PBC-60 (F.01U.026.573) with integrated uninterruptable
power supply (UPS).
System Overview
The Access Controller AMC2-4R4 is connected between the
management host system and different peripheral devices. By
default, a management host system is connected using Ethernet.
A management host connection using RS-485 or RS-232 is also
possible. Corresponding to the available interfaces, one AMC2
3.4
16 en | Introduction
Access Modular
Controller
2013-08 | AMC2-4R4 | Bosch Sicherheitssysteme GmbH