Bosch ADS-AMC2-4R4CF, Руководство по установке

Страница: 7 / 56

Access Modular Controller 2 Short information | en 7
Bosch Security Systems B.V.
Installation manual
2022-03 | V03 |
2 Short information
The AMC2 can control a maximum of eight ID readers (depending on the reader type) and fully
processes the access logic at the assigned entrances.
The device controls a group of one to eight access points. These access points, also known as
entrances, can be:
–
doors
– gates
– barriers
– turn stiles
– revolving doors
– mantraps
– ID card, PIN and biometric readers
– door opening elements
– sensors.
All the product versions use encrypted connections between the access modular controller
and the host system.
The controller stores all necessary information in a battery-buffered memory and in a compact
flash storage element. Even when the unit is offline, it is able to perform:
–
Independent status and authorization checks on access points
– Take access decisions
– Activate and deactivate connected peripheral elements
– Detect and register all relevant events
The Access Modular Controller (AMC) is supported by the Access Professional Edition (APE),
BIS Access Engine (ACE) and the Access Management System (AMS).
For the latest information about our products, visit our online product catalog:
www.boschsecurity.com/xc/en/product-catalog/
Manufacturing dates
For product manufacturing dates, go to www.boschsecurity.com/datecodes/ and refer to the
serial number on the product label.
Remarks
This hardware is part of a security system.
Access should be granted to authorized people only.
Some states do not allow the exclusion or limitation of implied warranties, or limitation of
liability for incidental or consequential damages, hence the above limitation or exclusion might
not apply to you.
If you need further assistance or have any questions, contact:
Bosch Security Systems B.V.
Torenallee 49
5617 BA Eindhoven
Netherlands
www.boschsecurity.com
© Bosch Security Systems B.V., 2022