Bosch ACS 255, Оригинальное руководство пользователя

Страница: 10 / 24

F 002 DG9 432 2014-12-19
|
Bosch Limited
10 | ACS 255 | Commissioning en
4. Commissioning
i
All the operations described in chapter 4 must be
performed prior to initial vehicle A/C system
servicing.
4.1 Removing the transport packaging
1. Remove the transport packaging.
2. Remove the components placed beneath the
ACS 255.
3. Move the ACS 255 out of the packaging palette.
4.
Disconnect the power cable from the power inlet.
!
Do not disconnect electrical connections or tamper
with the internal components. If there is any damage
or oil spillage, contact customer service.
1
459897_113Nkv
2
3
Fig. 5: Opening the rear panel
1 Refrigerant tank
2 Rear panel
3 Red and blue knobs
5. Open the rear panel (Fig. 5, Pos. 2).
6. Ensure that the red and blue knobs on the refriger-
ant tank are open.
7. Close the rear panel.
4.2 Before turning on for the first time
1. Remove the hoses, HP and LP couplers from the
packaging box.
2. Apply the brakes on the rear wheels.
3. Open the front panel.
4. Open the screw cap of the vacuum pump
(Fig. 6, Pos. 1).
1
2
459897_115Nkv
3
4
Fig. 6: Filling vacuum pump oil
1 Screw cap
2 Sight glass
3 Drain plug
4 Level indicator
5.
Observe the oil level in the vacuum pump sight glass
(Fig. 6, Pos. 2). If the oil quantity is inadequate,
open the screw cap of the vacuum pump.
6. Top up the oil.
i
Ensure that you use VPO46 High vacuum pump oil.
The maximum quantity of oil that can be filled is
400 ml.
7. Close the screw plug of the vacuum pump.
8.
Close the front panel.
9. Fix the oil bottles to the connectors.