Bosch 8 OptiMUM Series, Инструкция по применению

Страница: 32 / 176

en first time
32
2.
To change the distance, turn the
tool.
→
Fig.
4
Observe the values in the table:
Setting Distance
Optimum set-
ting
3 mm
One turn clock-
wise
1 mm more
One turn anti-
clockwise
1 mm less
3.
Press the release button and push
the swivel arm down until it en-
gages.
4.
Check the setting.
5.
Press the release button and raise
the swivel arm until it engages.
6.
Hold the beating whisk at the bot-
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
5.5 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched
on and operated if
¡
the swivel arm is engaged in posi-
tion 1 and the bowl is inserted.
¡
the swivel arm is engaged in posi-
tion 1 and the bevel gear is fitted
on the main drive.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to ⁠.
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡
too large a quantity is processed.
¡
processing is taking too long.
¡
a tool or accessory is blocked.
Swivel arm protection device
The swivel arm protection device pre-
vents the swivel arm from being
opened if an accessory is attached to
the rear drive.
fir s t time
6 Before using for the
first time
fir s t time
Prepare the appliance for use.
6.1 Preparing the appliance
1.
Press the release button and raise
the swivel arm until it engages.
→
"Opening swivel arm", Page 33
2.
Turn the bowl clockwise and re-
move.
→ "Removing bowl", Page 33
3.
Clean all parts that come into con-
tact with food before using for the
first time.
→
"Cleaning and servicing",
Page 35
4.
Put the cleaned and dried parts
out ready for use.