26
| en
7 620 320 024/028 | 09.2018
Robert Bosch Car Multimedia GmbH
General notes | Startup and basic functions
DVD country codes
Part number
Country code
7 620 320 024
RC2 (Europe)
7 620 320 028
RC5 (Africa, Asia)
Disposal of old unit
Do not dispose of your old device in
the household trash!
Use the return and collection systems
available to dispose of the old device.
Robert Bosch Car Multimedia GmbH hereby
declares that the DVP08 product complies
with Directive 2014/53/EU. The complete text
of the EU Declaration of Conformity is available
at the internet address below.
You will find the safety instructions and
information applicable to the device in these
operating instructions. You can download the
Declaration of Conformity for the device from
the Internet at
http://www.bosch-professional-systems.com.
Startup and basic
functions
If you installed the device as described in the
"Installation" section, you can start it up. Use
the remote control to utilise all the device
functions.
Note:
If the DVP08 is integrated as an
external video source in the Coach
Professional Line 3, you must use the
buttons on the DVP08 to operate it,
since unintentional interaction can
occur if the remote controls from the
DVP08 and the Coach Professional
Line are used in parallel.
Preparing the remote control for
use
When you operate the device for the first time,
you must first insert the batteries in the remote
control.
Inserting the batteries
f
Open the battery compartment by
removing the cover.
f
Insert the new batteries. Battery classifi-
cation: Two AAA batteries. Make sure that
the battery poles are positioned as shown
in the battery compartment.
f
Close the battery compartment.
Selecting the IR input
The DVP 08 may be installed in a location
where the integrated IR sensor
K
cannot be
reached by the remote control. In this case you
can install an optional external IR sensor
02_BA_DVP08_en.indd 26
25.09.18 14:34
