manualshive.com logo in svg

Bosch 22-15-2061, Перевод оригинальной инструкции по эксплуатации, Страница: 253 / 299

Поделиться
Скачать
Bosch 22-15-2061 Скачать руководство пользователя страница 253

MY22Z0a - 12_1.0_25.07.2022

252

Troubleshooting, fault clearance and repair

9.1.14.2 Rebounding too slowly

The fork does not rebound quickly enough after 
absorbing a bump. The fork also remains 
deflected over subsequent bumps, which reduces 
deflection and increases the hardness of impacts. 
Available deflection, traction and control decrease 
(blue line).

The fork remains in a deflected state, causing the 
headset and handlebars to move to a lower 
position. Body weight is shifted forward after the 
impact (green line).

Figure 248:  Suspension fork rebounding too slowly

Solution

Figure 249:  Turning the rebound screw damper towards 
hare symbol

Turn the rebound screw anti-clockwise towards 
the hare symbol.

The rebound speed is increased (fast return).

Содержание 22-15-2061












































































































































































































































































































Отзывы:

Нет отзывов