Bosch 22-15-2061 Скачать руководство пользователя

Страница: 233 / 299

MY22Z0a - 12_1.0_25.07.2022

232

About these operating instructions

Troubleshooting, fault clearance and repair

9.1

Troubleshooting and fault
clearance

The control panel indicates whether a critical or
less critical error has arisen in the drive system.

The error messages generated by the drive
system can be read in the eBike Flow app and by
the bicycle dealer.

The rider can use a link in the eBike Flow app to
display all information on errors and assistance on
eliminating errors.

9.1.1

Drive system or on-board computer
does not start up

If the on-board computer and/or the drive system
do not start up, proceed as follows:

Check whether the battery is switched on. If
not, start the battery.



Contact your specialist dealer if the battery
level indicator LEDs do not light up.

If the LEDs on the Battery Level indicator light
up, but the drive system does not start, remove
the battery.

Insert the battery.

Start the drive system.

If the drive system does not start up, remove
the battery.

Clean all the contacts with a soft cloth.

Insert the battery.

Start the drive system.

If the drive system does not start up, remove
the battery.

Fully charge the battery.

Insert the battery.

Start the drive system.

If the drive system does not start, press the

On-

Off button (control panel)

for at least 8 seconds.

If the drive system does not start after about
6 seconds, press the

On-Off button (control

panel) for at least 2 seconds.

Contact your specialist dealer if the drive
system won’t start.

Содержание 22-15-2061












































































































































































































































































































Результаты поиска

Содержание 22-15-2061

Отзывы:

Похожие инструкции для 22-15-2061

Бренды по названию

Популярные бренды

Bosch 22-15-2061, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 22-15-2061

Отзывы:

Похожие инструкции для 22-15-2061

Бренды по названию

Популярные бренды