14
| English
1 609 92A 37P | (22.8.16)
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Intended Use
0 607 560 500
The pneumatic tool is intended for knocking off tiles and plas-
ter, for making openings in walls and for separating pipes and
sheet metal.
0 607 560 502
The pneumatic tool is intended for knocking off roughcast, ex-
posing reinforced steel, as well as for roughing and cleaning
stone, concrete and steel.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
On/Off switch
2
Air outlet with silencer
3
Connection socket at air intake
4
Hose fitting
5
Hose clamp
6
Supply-air hose
0 607 560 500
7
Tool holder
8
Retaining spring
9
Hook clip
0 607 560 502
10
Needles
11
Guide sleeve
12
Pan head screw with lock nut
13
Needle holder
14
Apertured disc
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise/Vibration Information
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
An exact estimation of the level of exposure to vibration
should also take into account the times when the pneumatic
tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintaining the pneu-
matic tool and the accessories, keeping the hands warm, or-
ganisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-4.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
QC
Quick-change chuck
Tool holder
Symbol for hexagon socket
Symbol for external drive
UNF
US fine thread
(Unified National Fine
Thread Series)
G
NPT
Whitworth thread
National pipe thread
Connecting thread
Symbol
Meaning
0 607 560 ...
... 500
... 502
Sound emission values determined according to
EN ISO 15744.
Typically the A-weighted noise
level of the pneumatic tool is:
Sound pressure level L
pA
Sound power level L
wA
Uncertainty k
Wear hearing protection!
dB(A)
dB(A)
dB
91
101
1.0
93
103
1.0
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 28927:
Chiselling:
a
h
K
m/s
2
m/s
2
6.0
1.0
12.5
1.0
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1568-005.book Page 14 Monday, August 22, 2016 10:54 AM
