BOS Idylle SC, Руководство пользователя

Страница: 4 / 6

2.1. Spring
Before giving your forks their first spin, please do check that you are using the right spring rate.
With your forks (providing that it is not an original equipment) come extra springs in order to adjust to most of the
riders. By default, your forks come with the orange spring within.
The table below is for own use, please refer to it.
less than 45 kg 45 to 60 kg 60 to 80 kg 80 to110 kg
green red yellow purple
option
supplied
with the fork
supplied
in the fork
supplied
with the fork
Spring Preload
The sag on your forks shouldn’t exceed 25 to 45 mm (15% to 25% of the travel) therefore it is very important not to
preload the forks more than what‘s necessary. The sag has to be considered in dynamic situations (going down the
hill for instance) not static situations before preloading the spring, and it allows to raise the chassis at its right height.
Use a 14mm spanner to preload the spring (left stanchion, disc brake side) turning clockwise.
Do not preload further than 20 clicks. Otherwise, it’s better to change for a softer -or harder- spring.
Spring swap & preload
It’s an easy operation.
1. After having unscrewed the triple crown, undo the top cap on the top of the stanchion.
2. Remove the preloader (3) to adjust the number of spacers required (2).
3. If you wanna replace the spring (4), remove the preloader and the spacers, to get acces to it.
Caution :
slightly grease the O-ring of the cap prior to mount it back.
1
3
2
4
2. REGLAGES