Borri UPSaver 1000 kVa, Руководство по эксплуатации, Страница: 98 / 185

UPSaver installation and start-up
OMH44149 REV. C 85
3) Close the switch RCB1 in order to start the module 1 control logic. The module start-up
can be skipped by pressing the
SKIP button; the display will immediately switch to the
following module. The skipped module can be started at a later stage using the Module
insertion procedure.
Picture 93 – Module 1 start-up
4) The module 1 rectifier is started; at the end of this phase the sequence requires the
bypass line to be supplied.
Picture 94 – Module 1 start-up
5) Press the button SBCB1 to supply the module 1 bypass line and wait for the closure of
the back-feed contactor located inside the I/O module.