Borri GIOTTO 1000VA, Руководство пользователя, Страница: 6 / 12

FRONT PANEL EXPLANATIONS
GIOTTO
450/650/850/1000/1500/2000VA
LCD FRONT PANEL
1. Line mode 4. Battery 7. Fault
capacity
2. Battery mode 5. Load level 8. Tack switch for
Turn-on/Turn-off
3. AVR mode 6. Measurement
Target & Value
1. AC input outlet 3. Output receptacles 5. Modem/LAN Internet Protection
2. Fuse 4. RS-232 or USB port 6. Fan
(only for GIOTTO 1000/1500/2000VA)
REAR PANEL EXPLANATIONS
Note: Once the battery is disconnected, the loads are not
protected from power outages.
1. Use a cross-type screwdriver to remove the four screws from
bottom shell.
2. Take-up top cover and battery cover.
3. Loosen the black wire from the negative (-) terminal and red
wire from the positive (+) terminal.
4. Connect the battery leads to the new battery.
5. Note: Small sparks at the battery connectors are normal
during connection.
6. Slide the battery into the UPS.
7. Close the front panel and fasten two screws.
8. Dispose of the old battery properly at an appropriate
recycling facility.
REPLACE bATTERY
Rev. A 15.01.15 OML59002 Page 4
GIOTTO-1000/1500/2000VA
GIOTTO-450/650/850VA