Page
5
of
12
Rev 03
4 – Presentation of the manual
This manual contains instructions for the installation, maintenance and use of the SIRIO peristaltic pump, here
below simply called SIRIO.
This manual is intended for users of the equipment, and concerns its use after its production and sale. In the event
the equipment should be subsequently transferred to third parties for any reason (sale, loan for use, or any other
reason), the equipment must be delivered complete with all its documentation.
This manual contains proprietary information and may not be, even partially, provided to third parties for any
purpose and in any form, without the prior written consent of the manufacturer.
The manufacturer declares that the information contained in this manual is congruent with the technical and safety
specifications of the equipment and for the manual refilling of water inside an incubator machine, making it
possible to automatically maintain the set humidity rate.
5 – Technical features and specifications
Equipment model
SIRIO
SIRIO Power supply voltage
12V DC
Maximum absorbed power
4 W
Average daily consumption
1 Wh
Feeder power supply voltage (already
included)
100
-
240 V
50/60 Hz
Display
For digital control of humidity parameters
Electronic board
With microprocessor with modified PID algorithm
Range
Humidity can be modified from a Min. of 40% to a Max.of 75%
Dimensions and weight
Height mm 106
-
Width mm 88
-
Length mm 128 Weight: 0.440 Kg
Environmental operating conditions
Temperature From + 10°C
to MAX 40° C Relative humidity 20%
-
80%
Environmental storage conditions
Temperature from + 5°C to MAX 50° C Relative humidity < 90% without
condensation
1
Water distribution valve
2
Water suction pipe
3
Control panel
4
Sensor
5
Feeder