BORETTI BS-45, Инструкция по эксплуатации и обслуживанию

Страница: 20 / 132

WHAT TO DO IN CASE OF AN ANOMALY
PROBLEM SOLUTION
The oven does not work. Check whether the omnipolar switch or any
residual-current circuit breaker (cut-out) of the
electrical system is off. In case of problems with
the electrical system, consult a qualified
electrician. If the oven still does not work after
resetting the omnipolar switch and/or residual-
current circuit breaker, contact an Authorized
Service Centre.
The steam light is RED Close the oven door
Warning / alarm indication.
The steam light is flashing RED Warning / alarm indication. See the alarm codes
table.
Steam comes out of the oven during
operation. Check whether the door is closed correctly.
Check whether the seal is damaged with, for
example, cracks. In the second case, contact an
Authorized Service Centre.
WHAT TO DO IN CASE OF A BLACK-OUT
If the electricity supply is interrupted, when it comes back on again it may be necessary to
reset the time, if there is an electronic programmer in the oven.
HOW TO CHANGE THE COOKING CHAMBER SEAL
The seal located around the cooking chamber must be replaced if it has any cracks.
For safety reasons, the seal must be changed by an Authorized Service Centre technician.
HOW TO DISASSEMBLE THE OVEN DOOR
1. Open the oven door completely.
2. Locate the hinges (C), see the drawing to the side:
20