BORETTI BS-45, Инструкция по эксплуатации и обслуживанию

Страница: 17 / 132

Semi-automatic cooking
A. Programming the cooking time.
B. Programming the end of cooking time.
A) Set the desired cooking time using the button
.
Cooking will start immediately, and the display will show the symbols «AUTO» and
.
When the programmed time has expired, cooking will stop, and an intermittent signal will
sound. You can stop the signal as described above.
B) Set the desired end of cooking time using the button
.
Cooking will start immediately, and the display will show the symbols «AUTO» and
.
At the established time, cooking will stop, and an intermittent signal will sound. You can stop
the signal as described above.
It is possible to view the programming status at any time by pressing the corresponding
button. You can also cancel programming at any time by pressing the button and setting
the display to zero.
Then by pressing the the oven will switch to manual functioning.
Electronic signal
The function of the «timer» consists simply of a buzzer which can be set for a maximum period
of up to 23 hours and 59 minutes.
To set the timer, press and at the same time [+] or [-] until the display shows the desired time.
When setting is complete, the clock time will once again show on the display along with the
symbol
.
The countdown will begin immediately and can be seen on the display at any time, by simply
pressing on the
.
After the set time has expired, the symbol will go off and a buzzer will sound, which you
can shut off by pressing the button.
ATTENTION!
A power outage will cause deletion of programmed functions, including the clock.
Once you have turned the power back on again, three intermittent zeroes will appear, and you
can re-programme.
17