91
Decommissioning, disassembly and disposal
www.bora.com
EN
10 Decommissioning,
disassembly and disposal
10.3 Environmentally-friendly
disposal
Disposal of transport packaging
i
The packaging protects the appliance from
damage during transport. The packaging
materials have been selected taking into
account the environment and their disposal
and are therefore recyclable.
Recycling the packaging saves raw materials and
reduces waste. Your specialist retailer will take the
packaging back.
X
Give the packaging to your specialist retailer
or
X
dispose of the packaging correctly observing
regional regulations.
Disposal of accessories
X
Dispose of unnecessary or used accessories
(activated charcoal filters, etc.) accordingly taking
into account the regional regulations.
Disposal of the old appliance
Electrical appliances with this mark
must not be disposed of in the
household waste at the end of their
service life. They must be disposed
of at a collection point for the
recycling of electrical or electronic
appliances. Information on this can
be obtained from the city or local
councils.
Waste electrical and electronic appliances often
still contain valuable materials. However, they also
contain harmful substances that were necessary to
make them work and ensure their safety. If placed
in the household waste or handled incorrectly,
they may harm human health and damage the
environment.
X
Never dispose of your old appliance in the
household waste.
X
Take the appliance to a regional collection point for
the return and further processing of electrical and
electronic components and other materials.
X
Observe all safety and warning information
(see “2 Safety”).
X
Follow the enclosed manufacturer's information.
10.1 Decommissioning
Decommissioning refers to ultimate
decommissioning and disassembly. Following
decommissioning, the appliance can either be
installed in another unit, sold on privately or
disposed of.
i
The electricity and gas connections may
only be disconnected and cut off by certified
specialists.
X
Switch the appliance off before decommissioning
(see “6 Functions and operation”)
X
Disconnect the appliance from the power supply.
10.2 Disassembly
To be removed, the appliance must be accessible
for disassembly and disconnected from the power
supply.
X
Close the fresh water supply stopcock.
X
Remove the two fixing screws top left and right
behind the oven chamber seal.
X
Move the appliance slightly from side to side to
bring the shims back to their starting position.
X
Remove any other accessories.
X
Dispose of the old appliance and any soiled
accessories as described under “Environmentally-
friendly disposal”.
