bora PKCH2, Инструкция по эксплуатации и установке

Страница: 19 / 36

EN
19
Installation
www.bora.com
5.5.2 Installing the cooktop
3 2 1
Fig. 5.12 Insert cooktop
[1]
Connections for control knob and automatic extractor
function (front)
[2]
Cooktop
[3]
Worktop cut-out
X X
Insert the cooktop [2] into the worktop cut-out [3].
X X
Align the cooktop [2] exactly.
X X
For a normal installation, please note that the
connections for the control knobs and the extraction
system [1] are at the front.
INFO The device connection should be at the rear. Use
the cable holders provided.
1
2
Fig. 5.13 Cooktop and height adjustment plates
[1]
Cooktop
[2]
Height adjustment plates
X X
If applicable, insert the height adjustment plates [2].
Example bore holes
≥70
90 90 90
Ø50 ±0,5
90 196 196
370 370 110
1 1
Fig. 5.10 Bore holes for 2 cooktops and 1 cooktop extractor
[1]
Boreholes for socket (2x external)
[2]
Bore holes for control knobs (5x)
[3]
Cooktop (2x)
[4]
Cooktop extractor
[5]
Worktop
[6]
Floor unit front panel
≥70
90 90 90 90 90 196 196 196 196
370 370 370 110
1 1 1 1
110
Ø50 ±0,5
Fig. 5.11 Bore holes for 3 cooktops and 2 cooktop extractors
[1]
Boreholes for socket (2x external)
[2]
Bore holes for control knobs (8x)
[3]
Cooktop (3x)
[4]
Cooktop extractor (2x)
[5]
Worktop
[6]
Floor unit front panel