bora Classic 2.0 Series, Руководство по эксплуатации

Страница: 34 / 60

EN
34
Menu
www.bora.com
6 Menu
6.2 How to use the menu
Calling up the menu
i
The menu can only be called up if all cooking zones and
the cooktop extractor are inactive. In addition,
there must be no residual heat.
i
The menu button will only be displayed in the operating
panel when all functions are inactive and there is no
residual heat.
X
X
Tap the menu button
X O
The menu is called up and the first menu item is displayed
(colour mode “beige”).
Closing the menu
X
X
Long press on the menu button
X O
The menu is closed and the standard display appears.
Navigating the menu
X
X
Tap or to go to the required menu item.
X O
If you have chosen a menu item, after 2 seconds the display
automatically changes to the set value.
Schematic diagram
i
As a help setting, the menu shows the number of optional
settings (1 – 3) for each menu item.
Fig. 6.1 Schematic diagram of the options
Confirming and saving menu settings
X
X
Tap on or
or
X
X
long press on the menu button
X O
The system automatically adopts and saves set values when
you move to another menu item or exit the menu.
i
Below you will find explanations on how to use the menu
and a description of all menu items that can be accessed
by the end customer.
i
Further menu items are available to distribution partners
and retailers (see Extended menu chapter).
6.1 Menu overview
i
The BORA Classic 2.0 system only shows the relevant/
applicable menu items according to the appliance
configuration.
Menu item/Description/Selection area Factory
setting
Menu:
1 Volume of the acoustic signals (10 – 100%) 80%
2 Childproofing feature (On/Off) Off
3 Automatic extractor control (On/Off) Off
4 Duration of the cleaning lock (5 – 30 s) 15 s
5 Duration of the automatic after-run function
(10 – 30 min)
20 min
6 Retrieving the software version
7 Retrieving the hardware version
8 System software update
9 Data export
A Show the recirculation filter service life
(only in recirculation mode)
B Show filter type, change filter type and
reset filter service life (only in recirculation
mode, when the filter service life < 20h)
H Extraction system configuration Recirculation
J Select the filter type
(only in the case of recirculation)
F1 (ULBF)
L Fan configuration 1
Extended menu (access code required):
B Show filter type, change filter type and
reset filter service life (only in the case of
recirculation)
D Demo mode Off
E Display and button test
F Reset to factory settings
Gas configuration menu (only on CKG):
P GPU (gas classification no.) 0
S GASt (gas characteristic curve) B
T GAS (turn off gas)
Tab. 6.1 Menu overview