background image

EN

23

Appliance description

www.bora.com

4.4.2  Cleaning lock (wipe function) 

The cleaning lock prevents settings from being changed when 

wiping the operating panel during a cooking session. Upon 

activation the operating panel is locked for a certain time 

(factory setting 15 seconds). The remaining time is displayed.  

All appliance settings remain unchanged in the meantime.

The duration of the wiping time can be set in the menu (5 – 30 

seconds). 

 

i

If the operating panel is cleaned with a damp cloth, a film 

of water may form and the power button may be triggered 

despite the cleaning lock being activated. This can be 

corrected by drying the panel immediately after cleaning.

4.4.3  Safety shut-down

If the appliance is switched on but not used for 2 minutes,  

it will automatically switch off (standby mode).

Cooktop extractor

The cooktop extractor will be automatically switched off 

30 minutes after all cooking zones have become inactive  

(= power level 0) and the automatic after-run function will be 

started.

Cooktops

Each cooking zone is automatically switched off after a 

predefined operating time in which the power level has not been 

changed. 

Power levels Safety shut-down after hrs:min

Cooktops CKFI, 

CKI, CKIW, CKT

Cooktops CKCH, 

CKCB

Cooktop 

CKG

1

08:24

06:00

08:24

2

06:24

06:00

06:24

3

05:12

05:00

05:12

4

04:12

05:00

04:12

5

03:18

04:00

03:18

6

02:12

01:30

02:12

7

02:12

01:30

02:12

8

01:48

01:30

01:48

9

01:18

01:30

01:18

ßp

00:10

0:10 (only in the 

case of CKCH)

00:20

Tab. 4.20 

Safety shut-down for power levels

Warming level

Safety shut-down after hrs:min

1 (

,

)

08:00

2 (

:

)

08:00

3 (

*

)

08:00

Tab. 4.21 

Safety shut-down for warming levels

X

X

Switch the cooking zone back on if you want to put the 

cooking zone back into operation (see Operation chapter).

Bridging function 

With the bridging function two cooking zones can be combined 

to form one large cooking zone. The power for the combined 

zones is then adjusted by a single operating control. Power 

adjustment takes place simultaneously (both cooking zones are 

operated on the same power level).

The bridging function is suitable for heating food, e.g. in a 

roaster.

Pan size recognition on induction cooktops

The cooking zone automatically detects the size of the cookware 

and only focuses the energy on that area. It also recognises 

cookware that is unsuitable or too small or if there is no 

cookware present.

A cooking zone is not working if 

v

,

 is flashing in the display. This 

happens if...

X

O

... it is switched on without cookware or with unsuitable 

cookware.

X

O

... the base diameter of the cookware is too small.

X

O

... the cookware is removed from a cooking zone that is 

switched on.

If no pot is recognised 9 minutes after setting a power level, the 

cooking zone will switch off automatically.

Cooking zone timer (automatic cut-off) 

When cooking zones are in operation, the automatic cut-off 

function automatically switches off the selected cooking zone 

once a preset time has lapsed.

If the selected cooking zone is not active when the timer is 

started, only an acoustic signal will be heard when the time has 

lapsed.

The timer function can be used on up to 4 cooking zones  

(multi-timer).

Pause function 

With the pause function all cooking zones can be quickly and 

easily deactivated temporarily. When the function is cancelled, 

operation resumes at the original settings.

The cooking session can be paused for max. 10 minutes. Once 

10 minutes have lapsed, all cooking sessions are automatically 

ended.

Cleaning function on the Tepan stainless steel grill 

The cleaning function adjusts the Tepan stainless steel grill to 

a constant temperature of 70 °C, which is perfect for cleaning. 

This temperature is then maintained for 10 minutes.

4.4  Safety devices

4.4.1  Control lock 

The control lock prevents unintentional use of the cooktop 

extractor and cooktops during operation.

X

O

If the control lock is active, the symbol   lights up. 

X

O

The functions are locked and the indicators on the display are 

dimmed (exception: power button).

Содержание Classic 2.0 Series





























































Отзывы: