bora CI11, Инструкции по эксплуатации и монтажу

Страница: 14 / 28

EN
14
Device description
www.bora.com
4.4.3 Cooking zone overheating protection
The induction coils and cooling elements of the electronic
system are equipped with an overheat protection. Before
the induction coils and/or cooling elements overheat,
the overheat protection will initiate one of the following
measures:
Q Q
The power level
P
is automatically switched to power
level
9
after 10 minutes. The cooking zone indicator
P
switches to
9
.
Q Q
The set power level is reduced.
Q Q
The cooking zones switch off automatically
(see safety shut-down of the cooking zones).
4.4.4 Automatic switch-off if the button is
pressed and held
The cooktop will be switched off automatically when
one or more sensor buttons are touched for longer than
10 seconds (finger contact, objects, soiling).
Q Q
The display shows
/
.
Q Q
After a few seconds, the cooktop will switch off.
X X
Remove the finger or object from the cooktop.
X X
Clean the cooktop as required.
X X
Where necessary, switch the cooktop back on.
4.4.5 ‏Child safety lock
The child safety lock prevents the cooktop from being
switched on automatically. The child safety lock can only
be activated when the cooktop is switched on and all
cooking zones have been switched off (see the Operation
chapter).
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Q Q
Humming may occur when using a high power level. It
decreases or disappears if the power level is decreased.
Q Q
Crackling or whistling may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Q Q
Clicking sounds may occur during electronic
switching procedures especially at low power levels.
Q Q
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the electro-
nic system, the cooktop is equipped with a cooling
fan. The cooling fan switches on automatically if the
cooktop is used intensively. You will hear a whirring
sound. The cooling fan may continue running after the
device has been switched off.
4.4 Safety devices
4.4.1 Residual heat display
INFO While
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed in the cooking zone indicator (residual heat
indicator). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60°C).
4.4.2 Safety shut-down of the cooking zone
Each cooking zone is switched off automatically when the
cooking zone in the power level exceeds the maximum
operating duration.
H
(residual heat display) is then
displayed in the cooking zone indicator.
Power level
V
1 2 3 4 5 6
Switch off after
hours:minutes
02:00 08:40 06:45 05:15 04:20 03:30 02:45
Power level
7 8 9
Switch off after
hours:minutes
02:20 01:45 01:30
Tab. 4.5: Overview of the safety shut-down
X X
Switch the cooking zone back on (see Operating
control) if you want to put the cooking zone back into
operation.