bora CI11, Инструкции по эксплуатации и монтажу

Страница: 12 / 28

EN
12
Device description
www.bora.com
4.3.1 Power levels
The high power output of induction cooktops results in the
very quick heating up of cookware. A slight adjustment is
needed in comparison to conventional cooking systems
when selecting the power level in order to avoid burning
food.
Activity Power level
Keeping cooked food warm at
approx. 75°C
V
Melting of butter and chocolate,
breaking up gelatine
1
Keeping sauces and soups warm,
soaking rice
1-3
Cooking potatoes, pasta, soups, ragouts,
steaming fruit, vegetables and fish,
defrosting food
2-6
Frying in coated pans, moderate frying
(without overheating the fat) of pork
cutlets, fish
6-7
Heating up fat, browning fish,
cooking thickened sources and soups,
making omelettes
7-8
Cooking large quantities of liquid,
browning steaks
9
Heating up water
P
Tab. 4.2: Recommendations for power levels
The specifications provided in the table are standard
values.
Depending on the cookware and filling quantity, it is
recommended to either decrease or increase the power
level.
4.3.2 power setting
The two cooking zones are equipped with a power-
enhancing power setting.
The power setting can be used in order to quickly heat up
large quantities of water. If the power level is activated,
the cooking zones will run at extra high power. After
10 minutes, the power level is automatically switched to
level
9
.
If the bridging function is activated, the power setting
cannot be used.
INFO Never heat up oil, fat and the like at this power
setting. The bottom of the pan can overheat
due to the high power output.
Display panel Display Meaning
Cooking zone
indicator
1
...
9 Power level
P
power setting
A Automatic heat up
function
L
Child safety lock active
II Break
V
Heat retention level
V
No cookware or
cookware is too small.
/
Button pressed and held
H Residual heat display:
Cooking zone is
switched off but still hot
(temperature > 60°C)
Cooking zone
indicator lamp
On Automatic cut-off (timer)
activated
Flashes Timer on (00);
no time set
Off Timer off
Timer display
01
...
99
Set minutes for short
time (alarm) or automatic
cut-off (egg timer)
00
Timer on;
no time set
Tab. 4.1: Meaning of displays
Touch control
The operating panel is fitted with electronic sensor buttons
and display panels. The sensor buttons respond to finger
contact.
You operate the device by touching the corresponding
sensor key with your finger. Keep the finger pressed on the
sensor key until you either hear an acoustic signal or the
display changes accordingly.
4.3 Functional principle
An induction coil is located underneath an induction
cooktop. If the cooking zone is switched on, this coil
creates a magnetic field that acts directly on the base
of the pot thus heating it up. The cooking zone is only
indirectly heated up by the heat emitted by the pot.
Cooking zones with induction only work if the cookware
has a magnetisable base.
The induction automatically takes into account the size of
the used cookware which means that only the area in the
cooking zone covered by the base of the pot is heated up.
X X
Observe the minimum pot base diameter (see the
Technical data chapter).