bora BHA, Инструкция по эксплуатации и сборке

Страница: 31 / 44

EN
31
Operation
www.bora.com
Setting the short time (egg timer)
X X
Press and simultaneously.
In the timer display
00
will appear for a few seconds.
X X
Press or to set the required time.
Setting the automatic cut-off (timer)
You can set an automatic cut-off for every cooking zone.
INFO The cooking zone control light indicates whether
the automatic switch off is activated. The cooking
zone indicator light lights up until the cooking
zone is switched off after the pre-set time has
passed.
INFO If several cooking zones are activated with an
automatic cut-off, the cooking zone indicator light
with the lowest timer value will light up provided
that a cooking zone was not selected.
Prerequisite
Q Q
A cooking zone has been selected.
Q Q
A power level was set.
X X
Press and simultaneously.
In the timer display
00
will appear for a few seconds.
X X
Press or to set the required time.
After the last input, the set time will be displayed in the
timer display for a few seconds.
Changing the timer settings
X X
Press the cooking zone button for the cooking zone
(e.g. ), for which you wish to change the automatic
cut-off.
X X
Press and simultaneously.
In the timer display, the set time is displayed and the
cooking zone indicator light flashes.
X X
Press or to set the required time.
If several timers are active
X X
Continue pressing and simultaneously until
the indicator light for the desired cooking zone starts
flashing.
The cooking zone control lights are controlled in a
clockwise order for which a timer was activated,
beginning with the short time (egg timer).
X X
Press or to change the set time.
Switching the timer off early
X X
Press the cooking zone button of the cooking zone for
which you wish to switch off the timer.
X X
Press and simultaneously.
In the timer display, the set time is displayed and the
cooking zone indicator light flashes.
X X
Press until the timer display shows
00
.
Switching on the automatic pre-cook valve
X X
Press the cooking zone button (e.g. ) for the
required cooking zone.
The cooking zone indicator lights up more brightly.
X X
Continue pressing the until power level
9
is
displayed in the cooking zone indicator.
X X
Press again.
An
A
appears in the display.
X X
Press within 5 seconds until the required
continuous cooking level appears in the cooking
zone indicator.
An
A
and the configured continuous cooking level
appears in the display for the duration of the active
automatic pre-cook valve.
INFO After the heating time has passed, the power will
be reduced to the selected continuous cooking
level.
Switching the automatic pre-cook valve off
early
X X
Press the cooking zone button (e.g. ) of the desired
cooking zone. The indicator will appear brighter.
X X
Continue pressing until the power level you want
is displayed.
or
X X
Continue pressing until power level
9
is displayed
in the cooking zone indicator.
The set power level lights up more brightly in the
cooking zone indicator and automatically gets darker
after a few seconds. The automatic pre-cook valve
is now no longer active.
7.1.9 Using the timer function
Prerequisite
Q Q
The cooktop must be switched on.
You can use 2 timer functions:
Q Q
Short time (egg timer) (the cooking zone is not
automatically switched off)
Q Q
Automatic cut-off (timer) (for automatic cutting off of
cooking zone)
You can set a time range of between 1 and 99 minutes
for both timer functions.
INFO If you first press , 1 minute is pre-set as the
start time.
If you first press , 30 minutes are pre-set as the
start time.
INFO After the pre-set time has passed in the timer
display,
00
will be shown for a few seconds.
A signal tone will sound for a few seconds.
Switching off the timer signal tone
X X
Press any sensor button on the operating panel to end
the signal tone prematurely.