BOPIXEL OPR405 Series, Руководство по эксплуатации

Страница: 1 / 22

OPR405 Series DLP projector operating manual
Catalogue
一、
Precautions for use .........................................................................................1
二、
Module Hardware Features ...........................................................................2
三、
Port Description .............................................................................................3
3.1 PCB board port position description.................................................................3
3.1.2 Trigger input——J1..........................................................................4
3.1.3 Trigger output——J2........................................................................4
3.1.4 JTAG BOUNDARY SCAN——J10................................................... 4
3.1.5 Power source 12V——J11.................................................................. 5
3.1.6 USB connector——J15....................................................................... 5
3.1.7 LED control signal——J16................................................................. 5
3.1.8 LED drive power——J35....................................................................5
3.1.9 I2C connector——J36......................................................................... 6
3.1.10 Fan connector——J37.......................................................................... 6
3.2 LED driver board port position description...................................................6
3.2.2 RED LED Port——J1......................................................................... 7
3.2.3 LED Control signal input——J2......................................................... 7
3.2.4 GREEN BLUE LED Port——J3.........................................................7
3.2.5 Drive power input——J4.....................................................................7
四、
Operating Manual................................................................................................8
4.1 Product Manual.................................................................................................8
4.2 Software and Documentation............................................................................8
4.2.1 Software..................................................................................................8
4.2.2 Software Installation...............................................................................8
4.3 Image Input and Control...................................................................................9
4.3.1 Three 8bits combined into a 24bit image ..............................................10
4.3.2 Firmware for making two 24bit images................................................13
4.3.3 Upload firmware...................................................................................15
4.3.4 Set display mode...................................................................................16
4.3.5 Save picture settings............................................................................. 18
五、
Guarantee........................................................................................................... 20