Important Safety Instructions:
Please read these instructions, keep them, and
heed all warnings.
Listening Safely: Follow all instructions.
To protect your hearing, follow these guidelines when you
use headphones.
•
The Boostaroo Revolution provides up to 4 times
the power or volume to ordinary headphones.
Use caution to protect your hearing.
•
Set the volume of your player or volume control
headphones to the lowest setting before you begin
listening. After you begin listening, adjust the
volume to a comfortable level.
•
Do not listen at extremely high volume levels.
Extended high-volume listening can lead to
permanent hearing loss.
•
Once you set the volume, do not increase it. Over
time, your ears adapt to the volume level, so a
volume level that does not cause discomfort might
still damage your hearing.
Traffic Safety
Do not use headphones when operating a motor vehicle or
riding a bicycle in or near traffic. Doing so can create a
traffic hazard and could be illegal in some areas.
If you use headphones while riding a bicycle, be very
careful. Do not listen to a continuous broadcast.
Even though some headphones let you hear some outside
sounds when listening at normal volume levels, they still
can present a traffic hazard.
CARE & WARRANTY
DO NOT submerse this apparatus in water.
Water will short circuit the unit and cause permanent
damage to the unit that is not covered by the warranty,
Keep the Boostaroo Revolution dry; if it gets wet, wipe it
dry immediately. Use and store the headphone booster
only in normal temperature environments. Handle the
headphone amplifier carefully; do not drop it. Keep the
headphone amplifier away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it looking new.
The Boostaroo Revolution comes with a 12-month warranty
against manufacturing defects and failures from date of
purchase. For further warranty and product information go
to www.upbeataudio.com/warranty.html
Modifying or tampering with the Revolution’s internal
components can cause a malfunction and may invalidate
its warranty. If your headphone amplifier is not performing
as it should, contact us at http://www.upbeataudio.com or
call UpBeat Audio, LLC. Toll free at 1-800-800-4354.
Features:
Your Boostaroo Revolution® Hi-Fi 2-Channel Headphone
Amplifier and Splitter lets you share a single audio source
with two headphones or mini-speakers. The Boostaroo
Revolution® provides uniform amplification and provides up
to 4 times the volume from the player to each output
device.
UpBeat Audio's Cross feed Circuit – Our Patent Pending
audio cross feed circuit increases the dynamic range of
audio providing the user with clearer audio and a more
natural listening experience with headphones. Many users
compare it to a sense of being in a recording studio with
the actual artist.
The cross feed circuit works by taking audio samples from
the left and right channels delaying them and directing
them back to the opposite channel.
2-Way Audio Splitting — lets up to two listeners share
one stereo audio source, and images high fidelity sound
music into ordinary headphones. The unit is recommended
for headphones rated from 32 up to 600 Ohms. Also works
with noise canceling headphones.
Flexible Output Compatibility — lets you use either
headphones or mini-speakers, FM transmitters, and
(AUX)illiary connections.
Flexible Input Compatibility — lets you connect iPod’s
and MP3 players, CD and portable DVD players, laptops
and PC’s, PDA’s, NASCAR scanners, Satellite Radios, and
portable game systems. If it uses a headphone, it can use
a Boostaroo.
Easy On LED Light — indicates when the unit is on. Unit
is turned on when plugged into a player, off when
unplugged.
PREPARATION
Installing Batteries
Your headphone amp uses two AAAA batteries for power.
For the best performance and longest life, we recommend
alkaline batteries. Replacements may be purchased online
at
www.boostaroo.com
or at any major office supply,
electronics, or drug store.
Caution:
Boostaroo Revolution® 2-Channel Hi–Fidelity Headphone
Amplifier & Audio Splitter
Hear how your music is supposed to sound!
