BOOMX BXA-GSM-534-2G, Руководство пользователя

Страница: 11 / 13

Page 10 of 12 Ver 1.7 File No.: BXA-GSM-524_103
5.4.2 Inquiry status
5.4.3 Inquiry the GSM modules’ IMEI code and firmware version
5.4.4 RESET
Press and hold the RESET button (closed to the SIM card holder), switch ON, after 6 seconds later, the
BXA-GSM-524 will restart, then release the RESET button.
This operation will reset the password to default 1234 and other parameters, but the authorized user numbers
will remain on the memory.
6. Important information
1) Please read the User Manual carefully before you install and control the BXA-GSM-524.
2) Install the BXA-GSM-524 in a hidden place.
3) Avoid getting water into the BXA-GSM-524.
4) Have a secure connection to the main power supply.
7. Maintenance
1) In case of failure, please contact the distributor or manufacturer.
2) If the BXA-GSM-524 works but fail to send SMS texts, switch the power off and on again after one minute.
Test it after few minutes later or ensure and check the settings are correct and the cellular signal strong
enough.
3) If the BXA-GSM-524 works well with sensors but cannot send SMS texts, please change a SIM Card from
another Mobile Operator’s, and then testing again.
4) Please contact the distributor or manufacturer if the problem cannot be solved.
8. Warranty
1) The BXA-GSM-524 is warranted to be free of defects in material and workmanship for one year from the
date of purchase.
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the
Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by
purchasers.
pwdEE
pwdIMEI#