WITH POCKET SPEAKER YOU CAN:
1.
Play music from a Bluetooth-enabled audio device or audio source that is compatible with A2DP, such as an iPod/iPhone/iPad,
Android Smartphone, PC, or Mac.
2.
Play Music from a device connected through a 3.5 mm audio cable.
3.
Use the device as a speaker phone for a Bluetooth-equipped mobile phone.
4.
Connect and play media through up to 2 Pocket Speakers at the same time.
5.
Bring the party with you wherever you are.
1.
To Power On,
press and hold
power
button until tone is heard.
2.
Power LED turns steady color.
3.
If Pocket Speaker has been previously
paired with a Bluetooth device, the
Bluetooth LED will turn steady when
device is found.
4.
Press the power button to power device
off.
1.
Make sure that the Pocket Speaker is turned on.
2.
Make sure Bluetooth is turned on on your device.
Press and hold
the BT button (6) on the
Pocket Speaker until BT LED starts blinking blue, or an audible tone is heard.
3.
Open the Bluetooth menu on your device. Pocket Speaker will appear and show as not paired.
4.
Select Pocket Speaker to complete pairing and continue connecting. If asked, the passcode is
0000.
5.
When Pocket Speaker is connected, the BT LED will be steady blue and a tone will be heard.
6.
Note: Speaker battery life will be displayed on some compatible devices as shown below.
1.
Ensure the speaker is on and connected with your device.
2.
Play your music or media from your device.
3.
For optimal sound quality, adjust volume to a higher level on your device and use speaker to
adjust listening volume during play.
4.
Using the BT button will pause and resume play on your device.
5.
The speaker’s volume will be reset to mid-level upon powering-off.
• Volume Up - Press ‘+’ on top of speaker
• Volume Down - Press ‘-’ on top of speaker
• Note: A tone is heard only when maximum volume has been reached.
1.
Make sure that a BT connection has been set up between the paired mobile phone and he
speaker. When there is an incoming call, music play will be paused. You can then:
2.
When used with a PC, Mac, or tablet:
• Answer the call with the speaker - Press the BT button on the top of the
speaker.
• Hang up the call from speaker - Press the BT button on the top of the
speaker.
• Ensure that your device is BT equipped.
• Follow the BT set-up wizard on your device to pair and connect to Pocket
Speaker.
