®
Leslie is a registered trademark of Hammond Suzuki Corporation.
WWW.BOOKERLAB.COM
|
864.843.4459
Proudly Made in the USA
|
Amp Eliminator (AE) QuickStart Guide
Installation of the Amp Eliminator depends on your specific Leslie setup. An ideal location is in place of the stock Leslie
amplifier, in the lower part of the cabinet. Machine bolts and screws are provided for a variety of mounting options.
Product information, manual and accessories can be found online:
www.bookerlab.com/product/ae-amp-eliminator/
Important:
Disconnect AC power from the console organ, Leslie speaker, and any other connected
equipment before proceeding.
®
What’s in the box?
> AE01 – Amp Eliminator with 6-pin Console Input
> KT137 – Accessory bag with:
- (2) 10-24 machine bolts, black stainless
- (4) 3/4" wood screws, black stainless
- (4) 3/16” flat washers, black stainless
- (4) 4” plastic mini cable ties, nylon
- (4) self-adhesive rubber mounting feet
What’s Required?
- Extra 6-pin Leslie cable
- Two ¼” TS cables, length depends on your installation setup
D19
