bonitron M3612EC, Руководство для пользователей

Страница: 19 / 32

User’s Manual
19
4.
O
PERATION
4.1.
F
UNCTIONAL
D
ESCRIPTION
The M3612EC is a capacitor bank with an integral bleeder to build a DC bus if bus
filter capacitance is required.
4.2.
S
TARTUP
This section covers basic checks and procedures that may be used when performing
a startup with a M3612EC.
4.2.1.
P
RE
-P
OWER
C
HECKS

Ensure that all connections are tight and that all wiring is of the proper
size and rating for operation.

Verify continuity of all input fuses.

Ensure that the polarity of the DC link to the attached drive is correct.

Check for exposed conductors that may lead to inadvertent contact.

Check for any debris, shavings, trimmings, etc that may cause shorts or
obstruct ventilation on unit.

Perform the pre-power checks required for the attached drive.
4.2.2.
S
TARTUP
P
ROCEDURE AND
C
HECKS

After completing pre-checks and recommended checks for connected
equipment, you may apply power to the system.

Check bus voltage to make sure it is within the capacitance bank
specification.

The attached drive should then be started up according to its instructions.