BONIS ST535, Руководство пользователя

Страница: 5 / 33

Declaration of Conformity
This kiln is manufactured in accordance with EC
directives
Copyright by BONIS SA
No responsibility is accepted for the correctness of this information.
We reserve the right to make technical alterations.
2.2 KILN PLACEMENT
• Do not place the kiln on a flammable table / floor
• Place the kiln on an even surface
• The distance to the walls should be at least 25 cm
• Do not place / store any flammable materials close to the kiln.
Always have a safety distance of 50cm from the kiln.
• Do not store flammable liquids / gas in the same room with
the kiln.
• Place the kiln in a well ventilated area. If this is not the case a
ventilation system has to be installed.
• Place the kiln in a place that is protected from water / rain
• Place the kiln in a room
where kids and pets have no
access.
3. CONNECTION TO POWER SUPPLY
Kiln connection to power supply must be
completed by a certified electrician.
Do not attempt to connect the kiln by your
self if you are not a certified electrician.
5