Bongshin BS-3520, Инструкция по эксплуатации

Страница: 37 / 66

36
4
M
1
1
4
5
M
1
2
2
3
LO OK HI HOLD ZERO
BS
DIGITAL INDICATOR
-3520
LOW HIGH
1 2
M
1 2 3 4
3
LO OK HI HOLD ZERO
BS
DIGITAL INDICATOR
-3520
1 2
M
1 2 3 4
LOW HIGH
3
M
1
LO
LOW HIGH
OK HI HOLD ZERO
BS
DIGITAL INDICATOR
-3520
2 3 4
M
1 2 3 4
LO
LOW HIGH
OK HI HOLD ZERO
BS
DIGITAL INDICATOR
-3520
M
1 2 3 4
LO
LOW HIGH
OK HI HOLD ZERO
BS
DIGITAL INDICATOR
-3520
9-1-2 Lo and Hi setting method
(Lo, HI setting)
1. It turns into setting available status when you push key while pushing key at
measurement status.
2. Relay setting value change in available with the use of key or key.
3. It moves onto next stage when pushing key after relay setting value changing and saving.
4. It turns into measurement mode when pushing key in case of mode cancellation.
It is entered into relay
setting value change mode
when pushing No.2 key
while pushing No.1 key.
When pushing No.4 key after
changing Lo relay setting
value with the use of No.2
and No.3 key, it moves onto
next stage.
ex) 1.000kg
When pushing No.4 key after
changing Hi relay setting
value with the use of No.2
and No.3 key, it turns into
measurement mode.
ex) 3.000kg
Relay setting has been
completed and setting value
is saved.
It turns into measurement
mode status.
.
Entry to setting mode is available under Key Lock status.
Setting range display may differ based on location of decimal point.
Although meter display unit is 6 digit, Lo and Hi display unit is 5 digit. Therefore, no display is available for setting
value of 6 digit. (minus value setting up to ‐ 19999 is available)
Relay setting value can be initialized at check mode.
You can exit measurement mode when set Lo only and push No.1 key (M).
OK setting and output are operated within Lo and Hi setting value range.
(OK setting is not conducted separately)