Bongiovi Acoustics Clear 360 Pro, Руководство пользователя

Страница: 9 / 24

9
5. ATTACHMENT OF REPLACEABLE PARTS
5.1 Attaching Ear Wings
IMPORTANT: Attach the Medium size Ear Wings before first use. Only try a different size if there is a problem with
the fit. ( See “6. Wing and Foam Fitting” )
1. Orient the Ear Wing so that the rounded portion is facing towards the
top and rear of the Ear Piece.
a. The opening should be facing towards the front of the Ear
Piece.
2. Press the Ear Wing firmly onto the base of the post on the Ear Piece.
a. The tabs on the base of the post on the Ear Piece should seat
fully into the notches on the Ear Wing.
b. When installed correctly, the Ear Wing will lock onto the
tabs and will not be able to rotate.
_____________________________________________________________________________
5.2 Attaching Foam Ear Tips
IMPORTANT: Attach the Large size Foam Ear Tip before first use. Only try a smaller size if there is a problem with the
fit. ( See “6. Wing and Foam Fitting” )
1. Orient the Foam Ear Tip so that the flat end is facing towards the Ear
Piece and the rounded, tapered end is facing away from the Ear Piece.
2. Firmly press the Foam Ear Tip onto the post of the Ear Piece so that
the post seats inside the hole in the middle of the Foam Ear Tip.
a. The Foam Ear Tip should seat flat against the base of the
post on the Ear Piece.
b. The entire post should be seated inside of the Foam Ear Tip.
_____________________________________________________________________________
5.3 Replacing Wind Screens
The Wind Screens on the Ear Pieces should be replaced if they get dirty or become clogged with debris.
To remove the Wind Screen:
1. Pinch the front and back of the Wind Screen together between your
thumb and forefinger.