BONFIGLIOLI Vectron Active Cube, Руководство пользователя

Страница: 143 / 240

12.5.35 0x6091/n Gear ratio
Index Sub-index Meaning Data type Access Map Def.-Val
0x6091 0 Highest sub-index supported Unsigned8 ro No 2
1 Motor shaft revolutions Unsigned32 rw No 1
2 Driving shaft revolutions Unsigned32 rw No 1
Object works in:
• Motion Control:
o
All modes
Object doesn’t work in:
• Non motion Control (conf. ≠ x40)
Object 0x6091
gear ratio defines the ratio of motor shaft revolutions to driving shaft
revolutions.
s revolution shaft driving
s revolution shaft motor
0x6091/2
0x6091/1
ratio Gear
=
1116
1117
Parameter
Parameter
s Revolution Shaft Driving : Box Gear
s Revolution Shaft Motor : Box Gear
Writing to object
motor shaft revolutions automatically generates a write command to
parameter
Gear Box: Motor Shaft Revolutions
1117 (data set 5, all data sets in RAM
only!).
If object 0x6091/1 was written and then a save parameters command (object 0x1010 )
processed, the object value is stored in non volatile memory.
After the next power on of the inverter, the previously set value is reactivated and
overwrites the setting of
Gear Box: Motor shaft revolutions
1117.
Writing to object
driving shaft revolutions automatically generates a write command to
parameter
Gear Box: Driving Shaft Revolutions
1116 (data set 5, all data sets in RAM
only!).
If object 0x6091/2 was written and then a save parameters command (object 0x1010 )
processed, the object value is stored in non volatile memory.
After the next power on of the inverter, the previously set value is reactivated and
overwrites the setting of parameter
Gear Box: Driving Shaft Revolutions
1116.
Alternatively the parameters 1116 and 1117 can be used instead of the Objects.
Object Parameter
0x6091/1 Motor Shaft revolutions 1117
Gear Box: Motor Shaft Revolutions
0x6091/2 Driving Shaft revolutions
1116
Gear Box: Driving Shaft Revolu-
tions
=
04/13
CM-CAN ACU
143