BONFIGLIOLI Profinet DGM Series, Руководство по эксплуатации

Страница: 27 / 42

Accessing data via PROFINET
Operating manual for PROFINET fieldbus | DOC01725815-0003 | 2016-12 | V2.04 EN 29
4.2.2 Process data In which can be parameterized
The remaining 4 process variables (2
– 6) can be parameterized with the help of the Vplus Dec tool
using parameters 6.110 to 6.113. The available process variables of the parameter settings can be
found in the following table.
Serial no. Data type SW vers. Designation Unit Description
0 DWORD* 03.02 Digital relay outputs 1
Control of outputs:
Bit 0 = Dig Out 1
(Parameter 4.150 = 25)
Bit 1 = Dig Out 2
(Parameter 4.170 = 25)
Bit 2 = Relay 1
(Parameter 4.190 = 25)
Bit 3 = Relay 2
(Parameter 4.210 = 25)
Bit 4 = Virt Out 1
(Parameter 4.230 = 25)
1 REAL 03.02 Analogue Out 1 V Control of analogue output
2 DWORD 03.04
Customised
input variable 1
1
Customised input variable soft
PLC (32 bit)
4 REAL 03.04
Customised
input variable 2 / PID
actual value
-
Customised input variable soft
PLC
5 REAL 03.04
Customised
input variable 3
-
Customised input variable soft
PLC
6 REAL 03.04
Customised
input variable 4
-
Customised input variable soft
PLC
Tab.: 6 Process data In which can be parameterized
*
DWORD data type corresponds to UINT32 = 4 bytes